云南龙网

  1. 首页 > 生活百科 > >

交换机的数据监控( 三 )

生活百科


配置 port 3/1 作为 RSPAN 目的端口 ， RSPAN VLAN为500
Console> (enable) set rspan destination 3/1 500
Rspan Type : Destination
Destination : Port 3/1
Rspan Vlan : 500
Admin Source : -
Oper Source : -
Direction : -
Incoming Packets: disabled
Learning : enabled
Filter : -
Status : active
Console> (enable)
禁止 RSPAN 对话
set rspan disable source [rspan_vlanall]
set rspan disable destination [mod_num/port_numall]
禁止所有答应的源对话:
Console> (enable) set rspan disable source all
This command will disable all remote span source session(s).
Do you want to continue (y/n) [n]? y
Disabled monitoring of all source(s) on the switch for remote span.
Console> (enable)
通过rspan_vlan号 ， 禁止一个源对话:
Console> (enable) set rspan disable source 100
Disabled monitoring of all source(s) on the switch for rspan_vlan 100.
Console> (enable)
禁止所有目的对话:
Console> (enable) set rspan disable destination all
This command will disable all remote span destination session(s).
Do you want to continue (y/n) [n]? y
Disabled monitoring of remote span traffic for all rspan destination ports.
Console> (enable)

推荐阅读


上一篇：不要相信爱情的格言

下一篇：佩里科岛怎么去